亚洲激情视频网站-亚洲激情视频-亚洲激情区-亚洲激情欧美激情-黑白配hd视频-黑暗体操

Home News Design of disposable syringe

Design of disposable syringe

Time:2020-06-18 17:07:13 Hots:2397

The disposable injection syringe is composed of a syringe with a small hole at the front end and a matched piston core rod. The ejector is used to inject or extract a small amount of liquid into areas inaccessible by other methods. When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with syringes and syringes is called injection.The disposable syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases. Among intravenous drug users, the spread of diseases, especially HIV and hepatitis, is related to the reuse of needles and syringes.The injector syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases.Test principle of infusion bag permeability tester: designed based on the principle of differential pressure method, the pre-treated sample is placed between the upper and lower test chambers to form a constant differential pressure on both sides of the sample. Under the action of the differential pressure, the gas penetrates from the high-pressure chamber through the film to the low-pressure chamber, monitors the pressure change of the low-pressure chamber, and calculates the barrier parameters of the tested sample.When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with disposable syringes and syringes is called injection.

The disposable injection syringe is composed of a syringe with a small hole at the front end and a matched piston core rod. The ejector is used to inject or extract a small amount of liquid into areas inaccessible by other methods. When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with syringes and syringes is called injection.


The disposable syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases. Among intravenous drug users, the spread of diseases, especially HIV and hepatitis, is related to the reuse of needles and syringes.


The injector syringe can be made of plastic or all glass syringe, and usually has a scale indicating the volume of liquid in the syringe. Glass syringes can be sterilized by autoclave, but because the treatment cost of plastic syringes is low, most modern medical syringes are made of plastic, which further reduces the risk of blood borne diseases.


Test principle of infusion bag permeability tester: designed based on the principle of differential pressure method, the pre-treated sample is placed between the upper and lower test chambers to form a constant differential pressure on both sides of the sample. Under the action of the differential pressure, the gas penetrates from the high-pressure chamber through the film to the low-pressure chamber, monitors the pressure change of the low-pressure chamber, and calculates the barrier parameters of the tested sample.


When the core rod is pulled out, the liquid or gas is sucked from the small hole at the front end of the needle cylinder, and the liquid or gas is extruded when the core rod is pushed in. The process of extracting or injecting gas or liquid with disposable syringes and syringes is called injection.


Follow&Consult

主站蜘蛛池模板: 快播理论片 | 成 人 网 站免费观看 | 国产扒开美女双腿屁股流白浆 | 成年人视频免费在线播放 | 国产精品系列在线一区 | 九九精品久久 | 国产免费人成在线视频有码 | 青青青手机视频 | 精品午夜久久影视 | 小xav导航| 亞洲人妻AV無碼在線視頻 | 亚洲日韩中文字幕日本有码 | 一区三区三区不卡 | 草莓视频app深夜福利 | 亚洲一区二区三区高清网 | 高H内射NP古文 | 午夜伦理网 | 哺乳期妇女挤奶水36d | 日韩经典欧美一区二区三区 | 玩弄朋友娇妻呻吟交换电影 | 精品三级在线观看 | 肉色欧美久久久久久久蜜桃 | 中国字字幕在线播放2019 | 97在线观看免费视频 | 一边吃奶一边添P好爽故事 一边吃奶一边啪啪真舒服 一本之道加勒比在线观看 一本之道高清在线观看一区 | 一二三四在线高清中文版免费观看电影 | 夜色福利院在线观看免费 | 国产国产成年在线视频区 | WWW国产色情在线观看APP | 忘忧草研究所 麻豆 | 麻豆一二三区果冻 | 国产午夜精品福利久久 | 伊人久久综合谁合综合久久 | 久久re热线视频国产 | 为什么丈夫插我我却喜欢被打着插 | 色婷婷综合久久久久中文一区二区 | 799是什么意思网络用语 | 国产午夜伦伦伦午夜伦 | 办公室里做好紧好爽H | 臀精插宫NP文 | 97久久精品人人槡人妻人 |